Therefore, it is crucial to develop novel efficient heterogeneous

Therefore, it is Selleckchem RSL-3 crucial to develop novel efficient heterogeneous Fenton-like catalysts. Herein, we report a novel Fenton-like catalyst, LiFePO4 (LFP). LFP is usually used as an electrode material of a lithium ion battery [24, 25]. Interestingly,

we found that commercialized LFP particles with micrometer sizes showed much better catalytic activity in degrading rhodamine 6G (R6G) than magnetite nanoparticles. learn more Moreover, the catalytic activities of LFP microcrystals could be further improved by decreasing the particle sizes. Methods Materials and synthesis Lithium hydroxide, ammonium Fe (II) sulfate hexahydrate, phosphoric acid, commercial LFP (abbreviated as LFP-C), and R6G are all purchased from Sigma-Aldrich (St. Louis, MO, USA) and used as received. Magnetite nanoparticles were synthesized according to a reported co-precipitation method [26]. LFP microcrystals (abbreviated as LFP-H) were synthesized using a hydrothermal method [27]. Briefly, ammonium Fe (II) sulfate hexahydrate (5.882 g) and phosphoric acid (1.470 g) were dissolved into 40 mL of water. Lithium hydroxide (1.890 g) was also dissolved into 10 mL of water. And then, these two solutions were quickly mixed under vigorous magnetic stirring at room temperature. selleck After stirring for 1 min, the mixture

was poured into a 60-mL Teflon-lined autoclave. The autoclave was heated in a furnace at 220°C for 3 h. The as-synthesized LFP-H can PIK3C2G be easily separated by using a filter paper. After being washed by 95% ethanol for three times, the LFP-H particles were air-dried at 60°C for 24 h. Degradation experiments R6G was chosen as a model contaminant. The oxidation decolorization experiments of R6G

were carried out in 50 mL conical flasks. Unless otherwise specified, the experiments were performed at 20°C. Briefly, a certain amount of catalysts were added into 50 mL R6G aqueous solution with a concentration of 30 μg/mL. The pH was adjusted by diluted sulfate acid and sodium hydroxide. The suspension was stirred for 1 h to achieve the adsorption/desorption equilibrium between the solid catalyst and the solution. The concentration of R6G after the equilibrium was taken as the initial concentration (C 0). The degradation started just after an addition of hydrogen peroxide (30%) under stirring. Samples (1 mL) were taken from the reaction flask at a given time interval. The oxidation reaction was stopped by adding 100 μL of 1 M sodium thiosulfate solution. The catalyst was separated from the sample by a centrifuge at 10,000 rpm for 5 min. The concentration of the supernatant (C) was detected by using a UV-visible spectrometer after a water dilution of three times.

Comments are closed.