Lnd Eng Chem 1936, 28:988–990. 21. Xue ZX, Wang ST, Lin L, Chen L, Liu MJ, Feng L, Jiang L: A novel superhydrophilic
and underwater superoleophobic hydrogel-coated mesh for oil/water separation. Adv Mater 2011, 23:4270–4273.CrossRef Competing interests The authors declare that they have no competing interests. Authors’ contributions HL participated in the design of the study, carried out the experiments, performed the statistical analysis, and drafted the manuscript. YSL participated in the design of the study. QZL revised the manuscript. All authors read and approved the final manuscript.”
“Background Metastable intermolecular composites (MICs) are often composed of aluminum mTOR inhibitor review nanoparticles (the fuel is usually manufactured with a shell of alumina on each particle) and some oxidizer nanoparticles including CuO [1–12], Fe2O3[13–15], Bi2O3[5, 16],
MoO3[5, 17, 18], and WO3[5, 19, 20]. These MICs have drawn much attention recently in developing reliable SRT1720 in vivo and high-performance power selleck chemical generation systems due to their nanosized components which allow for the tuning of ignition temperature, reaction propagation rate, and volumetric energy density [12, 17, 21–24]. Applications include gas generators, micro-heaters, micro-thrusters, micro-detonators, and micro-initiators [25]. MICs can be used to fabricate an insert element which is assembled into the conventional solid propellants. This approach helps adjust ignition timing and enhance combustion propagation. However, the challenge remains in identifying a suitable MIC candidate for providing an optimal energetic performance which matches with the properties
of the solid propellants. Generally speaking, better control of the initiation process requires a sufficient heat production rate from the MIC core and a relatively slow pressure increase at the interface between the MIC core and the solid propellant. Gasless thermite reactions are desired for this reason. Gas generation from the thermite reactions is mainly attributed to the formation of vapors of metals (such as Cu, Fe, and Ni), the elemental oxygen (formed from the decomposition of the oxidizer), the gas of metal oxides if the combustion temperature is high enough, and other gaseous Fossariinae reaction products. While the metal vapor forms at a temperature which is above the boiling temperature of the metal, the release of elemental oxygen from the decomposition of the oxidizer component of MICs can be significant as well. Recently, Sullivan and Zachariah characterized the reaction mechanism of a variety of MICs [26], and they found that, while most oxidizers such as CuO and SnO2 decompose before the thermite reactions occur, which possibly indicates solid-state reactions, the decomposition of Fe2O3 becomes rate-limiting for igniting its thermite reaction. More investigations are needed in order to understand the cause of these different ignition mechanisms. Among the bulk scale thermite reactions, the Al-NiO system was reported to produce less gas [27].