At the periodicity of 60 nm shown in Figure 7, the deposited Ag particles were smaller than those at the periodicity of 100 nm, as shown in Figure 5, because of the reduction in the opening area of the alumina mask used for metal deposition. Consequently, suppressing the catalytic reaction, which has direct effects on anodic oxidation and silicon dissolution, was considered. A similar phenomenon related to the relationship between etching rate and the amount of catalyst was also reported by other groups [31, 32]. Lee et al. demonstrated that the fast etching rate for the aggregated spherical Au particles Selleckchem BAY 80-6946 (particle sizes of approximately 1 μm) was attributable
to the larger surface area of Au catalyst . When the amount of reduction of H2O2 per unit area of the cross section of the holes increases, the number of h+ injected into silicon should increase. As a result, it is concluded that the etching rate increases with an increase of the area of the catalyst. In other words, the total volume of the silicon dissolved during metal-assisted chemical etching strongly correlates with the area of the catalyst. In this work, it is notable that catalyst size effect was confirmed even when nanometer-sized metal particles were applied as catalysts. In addition, investigation of the
effect of metal catalysts on the morphology of etched silicon using ordered selleck products arrays of size-controlled catalysts is thought to be significant from the perspective of development of precise nanofabrication methods of semiconductors. Conclusions In summary, a resist-free nonlithographic method for the fabrication of ordered silicon nanohole arrays by a combination of localized metal deposition and the subsequent metal-assisted chemical etching Casein kinase 1 was demonstrated. The porous alumina formed directly on the Si substrate served as a mask for localized metal deposition and controlled the position and size of noble metals, which were deposited
only in the exposed area at the alumina mask/silicon interface. After metal deposition, the pattern transfer of the self-ordered pore configuration of porous alumina into silicon was examined by metal-assisted chemical etching. In brief, the present process consists of two independent processes: (1) noble metal nanodot arrays are obtained by displacement plating using an alumina mask in HF solution containing the desired metal ion and (2) straight silicon nanohole arrays are formed by the site-selective etching of silicon using the deposited noble metal as the catalyst in a solution of HF and H2O2. The Sirtuin activator inhibitor dimensions of the resultant nanohole pattern can be controlled by changing the anodization conditions of aluminum for forming an alumina mask, which include electrolyte type and anodization voltage, and the chemical etching conditions such as catalyst type, catalyst amount, etchant concentration, and etching time.